Advertisement

CHANGELOG

What's New in version 5.90.3550:

  • Added NVIDIA TU106 and GeForce RTX 2070.
  • Removed invalid Uncore VID reporting on some CPUs.
  • Fixed reporting of CPU temperature on some MSI Ryzen mainboards.
  • Enabled monitoring of some temperatures on ASUS MAXIMUS VII and Z97 series.
  • Enhanced sensor monitoring on GIGABYTE Z390 series mainboards.
  • Improved detection of EVGA iCX sensors.
  • Added recognition of several NVIDIA RTX 2080 and RTX 2080 Ti card models.
  • Fixed causing of high CPU VID on some AMD SP3, TR and TR2 systems.
  • Improved sensor monitoring on several ASRock Ryzen mainboards.
  • Added Cascade Lake B0 stepping.
  • Added monitoring of GPU fan RPM on NVIDIA Turing.
  • Added reporting of Ring to Core Offset status for Intel Kaby Lake/Coffee Lake.
  • Enhanced sensor monitoring on ASRock Z390 series mainboards.
  • Enhanced sensor monitoring on ASUS PRIME Z390, TUF Z390, ROG STRIX Z390 and MAXIMUS XI series mainboards.
  • Added detection of fake NVIDIA GPUs.
  • Added AMD Radeon RX 580 2048SP.

What's New in version 5.88.3510:

  • Enhanced sensor monitoring on MSI MS-7B10.
  • Fixed NXZT Kraken X52/X62 support on some systems.
  • Disabled ASUS WMI support on current BIOSes due to a faulty BIOS implementation.
  • Added NVIDIA TU102 and TU104.
  • Fixed stopping of fan on Corsair RMi PSUs.
  • Enhanced sensor monitoring on ASUS STRIX B450-F and STRIX B450-I.
  • Added NVIDIA Quadro P3200 and P4200.
  • Enhanced sensor monitoring on ASRock X470 and B450 series mainboards.
  • Enhanced sensor monitoring on MSI MEG X399 and MEG/MPG Z390 mainboards.
  • Added NVIDIA Turing branding.
  • Added support of Intel Amber Lake.
  • Added preliminary support of AMD Matisse.

What's New in version 5.86.3480:

  • Fixed a possible crash when monitoring multiple machines remotely.
  • Enhanced reporting of some sensors via ASUS WMI interface.
  • Disabled periodic polling of APIC timer clock (BCLK) on Windows 10 RS4 (1803) to avoid potential conflicts with OS.
  • Improved support of Intel Ice Lake.
  • Improved reporting of total memory size when SPD information is not available.
  • Added reporting of remaining battery time in sensors.
  • Enhanced sensor monitoring on ASUS B450 series mainboards.
  • Added support of Fintek F71809 HW monitor.
  • Enhanced sensor monitoring on MSI B450 and Z390 series mainboards.
  • Enabled running under Windows 10 on ARM (preliminary).
  • Added detection of ES/production status for AMD Zen CPUs

What's New in version 5.84.3450:

  • Enhanced sensor monitoring on ASRock Z270M-ITX.
  • Fixed a possible crash on some systems with larger VBIOSes.
  • Fixed enumeration of multiple VBIOSes in VFCT.
  • Enhanced sensor monitoring on MSI X470 series mainboards.
  • Enhanced sensor monitoring on ASUS X470 series mainboards.
  • Updated monitoring of stopped fan on Sapphire Radeon RX Vega GPUs.
  • Enhanced sensor monitoring on GIGABYTE X470 series mainboards.
  • Enhanced sensor monitoring on ASRock Z370M Pro4.
  • Fixed monitoring of Extension/Assistant fans on some ASUS 100-300 Intel series boards.
  • Added reporting of Core Performance Order for AMD Pinnacle Ridge.
  • Added a workaround for problems installing driver on some systems.
  • Added reporting of Secure Boot state.
  • Fixed monitoring of EC temperatures on some ASUS Z170 series mainboards.
  • Fixed a possible crash on some systems using Microsoft East Asian/IME keyboards.
  • Added reporting of FPGA information via SMBIOS.Enabled DELL EC sensor on Alienware Aurora systems.

What's New in version 5.82.3410:

  • Fixed a possible BSOD on some older machines.
  • Fixed a possible application crash on some AMD Bulldozer systems.
  • Fixed a possible application crash on some systems with Chinese or Japanese keyboard.
  • Enhanced sensor monitoring on ASUS H370, B360 and H310 series.

What's New in version 5.80.3400:

  • Security hardening of the HWiNFO kernel driver.
  • Added support of Nuvoton NCT6797D/NCT5567D LPC/HW monitor.
  • Enhanced sensor monitoring of future MSI 3xx mainboard series.
  • Added fan speed monitoring on several new ASUS notebook models.
  • Fixed reporting of current DMI link speed for several Intel CPUs.
  • Fixed reporting of AMD Zen temperature when using alternate scale range.
  • Added support of some ACPI sensors on Windows 10.
  • Enhanced sensor monitoring on ASUS G11CD.
  • Enhanced support of Intel Denverton.
  • Added monitoring of new AMD GPU Memory Usage parameter.
  • Extended reporting of AMD graphics driver version.
  • Enhanced sensor monitoring on EVGA X299 DARK.
  • Added universal monitoring of GPU Video Encode/Decode/Processing, Computing, VR usage on Windows 10.
  • Enhanced sensor monitoring on ASUS H370, B360 and H310 series.
  • Enhanced sensor monitoring on ASRock H370, B360 and H310 series.
  • Added reporting of VIA/S3G Chrome 64x GPU clocks.
  • Added a dedicated GPU sensor for GPUs other than Intel, AMD, NVIDIA.

What's New in version 5.79.2283 Beta:

  • Added support of Nuvoton NCT6797D/NCT5567D LPC/HW monitor.
  • Enhanced sensor monitoring of future MSI 3xx mainboard series.

What's New in version 5.74:

  • Added several new Intel and AMD CPU models.
  • Fixed a possible crash on some later AMD GPUs.
  • Updated disk activity sensor names on some systems.
  • Fixed a possible crash on some systems with multiple network adapters.
  • Fixed crashing on AMD Vega M GPUs (Kaby Lake-G).
  • Enhanced sensor monitoring on ASUS ROG STRIX X370-I GAMING.
  • Fixed summary window size when changing monitor scaling.
  • Enhanced sensor monitoring on ASRock H110M-DGS.
  • Updated reporting of ASUS waterflow sensors.
  • Enhanced sensor monitoring on ASUS WS-C621E-SAGE.
  • Fixed a possible crash during short report file creation on systems with NVMe.
  • Enhanced sensor monitoring on ASUS ROG STRIX B350-I GAMING.
  • Enhanced sensor monitoring on ASUS TUF B350M-PLUS GAMING and B350M-DRAGON.

What's New in version 5.73.3350 Beta:

  • Enhanced sensor monitoring on ASRock H110M-DGS.
  • Updated reporting of ASUS waterflow sensors.
  • Enhanced sensor monitoring on ASUS WS-C621E-SAGE.
  • Fixed a possible crash during short report file creation on systems with NVMe.

What's New in version 5.73.3345 Beta:

  • Fixed crashing on AMD Vega M GPUs (Kaby Lake-G).
  • Enhanced sensor monitoring on ASUS ROG STRIX X370-I GAMING.
  • Fixed summary window size when changing monitor scaling.

What's New in version 5.72:

  • Unified HWiNFO32 and HWiNFO64 packages (universal installer, combined portable

What's New in version 5.71-3315 Beta:

  • Added option to disable access to Corsair and some Asetek-based coolers.
  • Added recognition of some future AMD Vega and Navi GPUs.
  • Added NVIDIA Quadro V100.
  • Added reporting of GPU VRAM module model for som AMD GPUs.

What's New in version 5.70:

  • Enhanced sensor monitoring on EVGA X299 FTW K.
  • Added reporting of more AVX-512 features supported.
  • Added reporting Secure Memory Encryption (AMD) / Total Memory Encryption (Intel) supported.
  • Added monitoring of Intel GPU (GT) and Media Engine Usage for Skylake and later iGPUs.
  • Fixed reporting of some EC voltages on ASUS X99-DELUXE II, STRIX X99, X99-A II and RAMPAGE V EDITION 10 series.
  • Enhanced sensor monitoring on ASRock IMB-19x series.
  • Enhanced sensor monitoring on ASUS WS X299 PRO.
  • Enhanced SPD information for NVM (AEP) DIMMs.
  • Enhanced preliminary support of Intel Ice Lake.
  • Fixed reporting of temperatures on AMD Vega since Crimson 17.11.2 driver.
  • Added reporting of CPU per-core turbo ratios (IA/SSE, AVX2, AVX-512) for Intel.
  • Added several Coffee Lake CPU models.
  • Improved access to Intel Management Engine.
  • Improved BCLK measurement on Skylake-X/SP CPUs.
  • Fixed a rare crash on some AMD Multi-GPU systems.
  • Fixed reporting of VDDC on some Bonaire/Hawaii GPUs using later AMD drivers.
  • Fixed sensor monitoring on some MSI X99A series.
  • Added recognition of AMD Pinnacle Ridge.
  • Added reporting of CPU TDP and Tj,max for AMD Zeppelin family.
  • Added an universal method for determining Tctl_offset for AMD Zeppelin family.
  • Improved reading the real CPU model to avoid fakes for AMD Zen family.
  • Added monitoring of CPU Cache/Mesh voltage for ASUS RAMPAGE VI APEX/EXTREME (requires new BIOS).
  • Improved support of AMD Raven Ridge.
  • GPU I2C support is now automatically disabled on AMD Vega series to prevent a possible system crash.
  • Automatic disabling of GPU I2C support can be circumvented using a new GPU I2C Support Force option.
  • Added several new GPU card models.
  • Added preliminary support of Whiskey Lake.
  • Added NVIDIA TITAN V.

What's New in version 5.60:

  • Enhanced sensor monitoring on ASUS STRIX Z370-E,-F,-G,-H,-I GAMING.
  • Enhanced sensor monitoring on ASUS PRIME Z370-A,-P.
  • Enhanced sensor monitoring on ASUS TUF Z370-PLUS,-PRO GAMING.
  • Enhanced sensor monitoring on ASUS MAXIMUS X APEX.
  • Enhanced sensor monitoring on GIGABYTE Z370 series.
  • Fixed sensor monitoring on some MSI mainboards for Ryzen.
  • Added option to make the sensors window always on top.
  • Fixed sensor monitoring on ASRock Z270M Pro4, H270M Pro4, H270M Performance.
  • Added NVIDIA GeForce GTX 1070 Ti.
  • Added several new NVIDIA Volta models (GV100-A, GV100-B), Tesla V100.
  • Enhanced sensor monitoring on some ASRock X299 and Z370 series.
  • Added monitoring of GPU Hot Spot Temperature for AMD Vega.
  • Added monitoring of GPU SoC clock for AMD Vega.
  • Added reporting of NVIDIA GeForce driver version.
  • Fixed reporting of Radeon Vega GPU chip power since Crimson ReLive Fall Creators Update.
  • Fixed reading of W_PUMP+ on some ASUS mainboards.
  • Updated reporting of SVI2 telemetry for Threadripper.

What's New in version 5.58.3255:

  • Fixed reporting of GPU VDDC and MVDCC on AMD Radeon RX Vega
  • Fixed reporting of GPU memory current/power on AMD Radeon RX Vega
  • Fixed monitoring of some disk activity sensors
  • Enhanced sensor monitoring on ASRock X399 series
  • Added preliminary support of Intel Ice Lake
  • Updated monitoring of GPU Chip Power on AMD Radeon RX Vega
  • Fixed reporting of estimated efficiency of some Corsair PSUs
  • Enhanced sensor monitoring on MSI Z370 series
  • Enhanced sensor monitoring on Biostar TB250 series

What's New in version 5.56.3230:

  • Enhanced sensor monitoring on ASRock X299 series.
  • Enhanced sensor monitoring on GIGABYTE GA-990X-Gaming SLI-CF.
  • Improved RTSS OSD handling, added new options
  • Enhanced sensor monitoring on MSI X399 series.
  • Enhanced sensor monitoring on ASUS ROG CROSSHAIR VI EXTREME and ROG ZENITH EXTREME.
  • Enhanced sensor monitoring on ASUS ROG RAMPAGE VI APEX.
  • Reverted AMD GPU fan speed monitoring to direct method due to a bug in AMD ADL.
  • Enhanced sensor monitoring on GIGABYTE X399 series mainboards.
  • Fixed a possible system hang on GIGABYTE mainboards with IT8792E/IT8795E.
  • Added several new CPU logos.
  • Enhanced sensor monitoring on ASUS ROG RAMPAGE VI EXTREME.
  • Added support of Aquacomputer farbwerk temperature monitoring.
  • Fixed GPU utilization reporting stuck on some Radeon RX 5xx series GPUs.
  • Enhanced sensor monitoring on ASUS PRIME X399-A.Added AMD Radeon RX Vega 56, 64, 64 Liquid Cooling.
  • Added AMD Radeon Instinct MI25, MI25x2, Radeon Pro V320, V340, Radeon Pro SSG, Radeon Pro WX 9100.

What's New in version 5.54.3200:

  • Extended reporting of NVMe drive temperatures and added thresholds to sensors.
  • Improved calculation of Corsair PSU efficiency.
  • Added monitoring of EVGA iCX additional GPU temperatures and fans.
  • Added support of Corsair Link Commander Pro (CLCP).
  • Added reporting of CPU process technology (nm).
  • Added monitoring of NVIDA GPU performance limiting reasons.
  • Enhanced sensor monitoring on ASUS ROG STRIX X299-E GAMING.
  • Enhanced sensor monitoring on ASUS PRIME X299-A, PRIME X299-DELUXE and TUF X299 series.
  • Enhanced sensor monitoring on MSI X299 series mainboards.
  • Improved measuring of BCLK on Skylake-X.
  • Fixed a bug causing Shift- and Alt- hot key combinations not to work properly.
  • Added support of RTSS OSD custom colors (requires RTSS v7.0.0 or later).
  • Added support of RTSS OSD graphs (requires RTSS v7.0.0 beta 24 or later).
  • Added AMD Radeon Vega Frontier Edition.
  • Added option to specify custom/fixed font size for tray icons.
  • Improved option for number alignment in RTSS OSD.
  • Enhanced sensor monitoring on ASUS ROG ZENITH EXTREME.
  • Enhanced sensor monitoring on GIGABYTE X299 series.
  • Enhanced support of AMD Radeon Vega.

What's New in version 5.52.3161:

  • Fixed reporting of Trfc on Ryzen when DIMM0 is not populated.
  • Enhanced sensor monitoring on ASUS ROG STRIX X370-F and ROG STRIX B350-F.

What's New in version 5.50.3130:

  • Added NVIDIA GeForce GTX 1080 Ti
  • Fixed reporting of AMD Ryzen memory timings if first memory controller is not active
  • Fixed occasional erratic sensor readouts on ASUS CROSSHAIR VI HERO
  • Added reporting of SMU Firmware Revision for AMD Ryzen
  • Enhanced sensor monitoring on ASUS SABERTOOTH 990FX R30
  • Fixed reporting of CPB status on AMD Ryzen
  • Simplified adjusting of sensor item settings via right-click context menu
  • Added board-level monitoring of CPU current and power on ASUS CROSSHAIR VI and PRIME X370
  • Enhanced sensor monitoring on GIGABYTE X370 series mainboards
  • Enhanced sensor monitoring on some ASRock X370 series mainboards
  • Added support of some later Corsair H110i coolers
  • Added reporting of AMD AGESA version
  • Added a new telemetry method to monitor Ryzen CPU+SoC voltage, current and power
  • Improved support of Intel Skylake-SP
  • Fixed monitoring of water sensor temperatures on ASUS MAXIMUS IX and CROSSHAIR VI series
  • Added AMD Radeon RX 570 and RX 580
  • Improved support of AMD ThreadRipper

What's New in version 5.46.3100:

  • Added sensor table row shading
  • Fixed detection of some On Semi/ASUS EPU2 sensors
  • Enhanced support of Intel Coffee Lake
  • Enhanced sensor monitoring on MSI Ryzen mainboards
  • Added fan speed monitoring on ASUS X75 series notebooks
  • Fixed capacity reporting for drives with more than 512B logical sector size
  • Raised maximum number of remote monitored machines to 50
  • Added AMD Ryzen logo
  • Enhanced sensor monitoring on some ASUS X370 and B350 series mainboards
  • Enhanced sensor monitoring on some GIGABYTE X370 and B350 series mainboards
  • Improved appearance of transparent sensor tray icons
  • Added support of ITE IT8655E LPC
  • Added support of NVMe drives in Intel RST RAID mode

What's New in version 5.44.3070:

  • Fixed reporting of AMD GPU fan speed when not spinning.
  • Fixed support of multi-node AMD CPUs.
  • Enhanced sensor monitoring on more ASUS 200-series mainboards.
  • Enhanced sensor monitoring on several ASRock 100- and 200-series mainboards.
  • Added NVIDIA Quadro P400,P600,P1000,P3000,P4000,P5000, Quadro GP100, Tesla P6.
  • Added monitoring of NXZT Kraken X52.
  • Fixed reporting of ECC support for DDR4 moduels.
  • Added support of ITE IT8915FN monitoring on GPU.
  • Added preliminary support of Intel Cannon Lake.

What's New in version 5.40.3030:

  • Changed order of some CPU sensors. Some users might need to reconfigure their custom order.

What's New in version 5.38:

  • Improved GPU I2C caching for faster startup on some GPUs.
  • Fixed a possible crash on some systems with IPMI.
  • Added monitoring of GPU Chip Power (estimated) for AMD Hawaii and later GPUs.
  • Improved monitoring Frames per Second (FPS) via RTSS.
  • Fixed some sensor values for ASUS Z170I PRO GAMING.
  • Enhanced NVIDIA SLI status reporting.
  • Added NVIDIA GeForce GTX 1050 and GTX 1050 Ti.
  • Enhanced/fixed sensor monitoring on some ASUS, MSI and GIGABYTE mainboards.
  • Added AMD Radeon Pro WX 4100, 5100, 7100 and Radeon E9260.
  • Added support of ITE IT8686E LPC/hardware monitor.
  • Enhanced sensor monitoring on GIGABYTE Z270 series (preliminary).
  • Improved reporting of some disk S.M.A.R.T. attributes.
  • Added reporting of OPN for some AMD CPUs.

What's New in version 5.37.2977 Beta:

  • Improved GPU I2C caching for faster startup on some GPUs
  • Fixed a possible crash on some systems with IPMI
  • Added monitoring of GPU Chip Power (estimated) for AMD Hawaii and later GPUs

What's New in version 5.36:

  • Enhanced sensor monitoring on ASUS 970 Pro Gaming/Aura.
  • Fixed recognition of AMD Radeon RX 460.
  • Added support of Areca SAS/SATA RAID controllers.
  • Fixed some sensor values for ASUS STRIX X99, X99-DELUXE II, RAMPAGE V EDITION 10 and X99-A II boards.
  • Fixed GPU Voltage monitoring with On Semi NCP81022.
  • Improved appearance on Hi-Res displays with custom scaling.
  • Fixed memory timings for Apollo Lake.
  • Improved support of Gemini Lake.
  • Fixed and improved support of Polaris 11 family.
  • Added monitoring of GPU Memory Errors for ECC-capable NVIDIA GPUs.
  • Added option to specify individual polling rate for EC sensor.
  • Enhanced support of Intel Kaby Lake.

What's New in version 5.34.2930:

  • Added monitoring of extension and assistant fans on some ASUS X99/Z170 series.
  • Added option to change sensor logging (CSV) separator.
  • Added option to specify individual polling rate for disk S.M.A.R.T. status.
  • Added support of more International Rectifier PMBus-compliant VRMs.
  • Added switching between screens using arrow keys on Logitech G19 LCD.
  • Added synchronization with Corsair Link Software v4.2.4.25 and later.
  • Added option to disable NVML support to workaround a bug in NVIDIA SLI-enabled systems using R368 and some later drivers.
  • Added reporting of PSU efficiency for Corsair AXi/HXi/RMi series.
  • Enhanced sensor monitoring on ASRock E3V5 WS.
  • Added fan speed and additional temperature monitoring on HP Z440 Workstation.
  • Added C-State Residency monitoring for Intel CPUs.
  • Added preserving of column widths for all lists in the sensors screen.
  • Added NVIDIA Tesla P100, Titan X (Pascal), Quadro P6000, Quadro P5000 and GeForce GTX 1060 3GB.
  • Improved monitoring of Corsair H80i v2, H100i v2 and H115i.

What's New in version 5.33.2910 Beta:

  • Added monitoring of extension and assistant fans on some ASUS X99/Z170 series
  • Added option to change sensor logging (CSV) separator
  • Added option to specify individual polling rate for disk S.M.A.R.T. status

What's New in version 5.32.2900:

  • Enhanced preliminary AMD Zen support.
  • Fixed GPU Memory Controller Utilization reporting AMD Polaris.
  • Added NVIDIA GeForce GTX 1060.

What's New in version 5.30.2880:

  • Enhanced AMD Polaris support.
  • Changed MVDDC to VDDCI on AMD Bonaire, Hawaii, Tonga.
  • Added support of SMSC SCH5627 and SCH5636 HW monitors.
  • Added NVIDIA GeForce GTX 1080.
  • Added support of AquaStream Ultimate.
  • Removed showing of average values for some sensors where this has no meaning.
  • Added experimental reporting of CPU current/power for some later ASUS mainboards.
  • Added reporting of ASIC Quality for AMD RV7xx/M9x and later GPUs.
  • Added reporting of ASIC Quality for NVIDIA Fermi, Kepler and Maxwell GPUs.
  • Added reporting of GPU Memory Vendor for AMD RV7xx/M9x and later GPUs.
  • Added monitoring of GPU Memory Errors (EDC) for AMD Evergreen and later GPUs (except Fiji).
  • Added preliminary support of NVIDIA GP100, GP102, GP106, GP107, GP108.
  • Added NVIDIA GeForce GTX 1070.

What's New in version 5.24.2850:

  • Fixed SMBus problems on MSI 100-series mainboards with LED controllers.
  • Fixed a memory leak in server side of remote sensor monitoring.
  • Clicking the sensor graph plot area will toggle it to occupy the entire window width.
  • Added reporting of GPU TMU count.
  • Added AMD Radeon Pro Duo.
  • Enhanced NVMe support.
  • Enhanced sensor monitoring on ASUS Z97-PRO GAMER.
  • Fixed a rare crash during closing on some machines with NVIDIA GPU.
  • Added monitoring of CPU Power Limits on systems where these can change during runtime.

What's New in version 5.23.2835 Beta:

  • Fixed SMBus problems on MSI 100-series mainboards with LED controllers
  • Fixed a memory leak in server side of remote sensor monitoring
  • Clicking the sensor graph plot area will toggle it to occupy the entire window width
  • Added reporting of GPU TMU count
  • Added AMD Radeon Pro Duo
  • Enhanced NVMe support

What's New in version 5.22.2820:

  • Fixed a possible hang in sensors when system is using multiple page files.
  • Added hotkeys to disable/hide sensors.
  • Improved handling of invalid sensor values.
  • Disabled GPU I2C access on Fiji again due to stability issues.
  • Enhanced GPU temperature monitoring on Fiji (VR VDDC, VR VDD, Liquid).
  • Fixed CPU Power measurement on Haswell systems with overclocked BCLK.
  • Added monitoring of GPU VDDC for AMD Fiji.
  • Added monitoring of GPU Current and Power for AMD Hawaii/Bonaire and later generations.
  • Fixed SMBus issues on some Fujitsu machines

What's New in version 5.21.2815 Beta:

  • Fixed a possible hang in sensors when system is using multiple page files
  • Added hotkeys to disable/hide sensors
  • Improved handling of invalid sensor values
  • Disabled GPU I2C access on Fiji again due to stability issues
  • Enhanced GPU temperature monitoring on Fiji (VR VDDC, VR VDD, Liquid)
  • Fixed CPU Power measurement on Haswell systems with overclocked BCLK
  • Added monitoring of GPU VDDC for AMD Fiji
  • Added monitoring of GPU Current and Power for AMD Hawaii/Bonaire and later generations

What's New in version 5.21.2810 Beta:

  • Fixed a possible hang in sensors when system is using multiple page files.
  • Added hotkeys to disable/hide sensors.
  • Improved handling of invalid sensor values.
  • Disabled GPU I2C access on Fiji again due to stability issues.
  • Enhanced GPU temperature monitoring on Fiji (VR VDDC, VR VDD, Liquid).

What's New in version 5.20.2800:

  • Fixed monitoring of total/NAND reads/writes for some SanDisk drives.
  • Extended NVMe S.M.A.R.T. status and fixed total writes amount.
  • Fixed reporting of sub-zero temperatures on NVIDIA GPUs.
  • Added support of Samsung SSD 950 Pro using the default Microsoft NVMe driver.
  • Added preliminary support of AMD Ellesmere, Baffin, Greenland.
  • Fixed GPU I2C access on AMD Tonga/Amethyst.
  • Added options to choose which type of values (current, mix, max, average) to show in tray, LG LCD and RTSS.
  • Enhanced sensor monitoring on ASUS Z170-PREMIUM.
  • Added support of IRF IR35201.
  • Added monitoring of page file usage.
  • Added support of Corsair H80i v2, H100i v2 and H115i.
  • Improved monitoring of WHEA errors.
  • Enabled GPU I2C access on Fiji (GPU VRM monitoring). Might need Reset GPU I2C Cache first.
  • Enhanced sensor monitoring on ASUS Z97-P.
  • Enhanced DELL EC sensor monitoring.

What's New in version 5.13.2781 Beta:

  • Fixed monitoring of total/NAND reads/writes for some SanDisk drives.
  • Extended NVMe S.M.A.R.T. status and fixed total writes amount.
  • Fixed reporting of sub-zero temperatures on NVIDIA GPUs.
  • Added support of Samsung SSD 950 Pro using the default Microsoft NVMe driver.
  • Added preliminary support of AMD Ellesmere, Baffin, Greenland.
  • Fixed GPU I2C access on AMD Tonga/Amethyst.
  • Added options to choose which type of values (current, mix, max, average) to show in tray, LG LCD and RTSS.
  • Enhanced sensor monitoring on ASUS Z170-PREMIUM.
  • Added support of IRF IR35201.
  • Added monitoring of page file usage.
  • Added support of Corsair H80i v2, H100i v2 and H115i.
  • Improved monitoring of WHEA errors.
  • Enabled GPU I2C access on Fiji (GPU VRM monitoring).

What's New in version 5.13.2770 Beta:

  • Fixed monitoring of total/NAND reads/writes for some SanDisk drives.
  • Extended NVMe S.M.A.R.T. status and fixed total writes amount.
  • Fixed reporting of sub-zero temperatures on NVIDIA GPUs.
  • Added support of Samsung SSD 950 Pro using the default Microsoft NVMe driver.
  • Added preliminary support of AMD Ellesmere, Baffin, Greenland.
  • Fixed GPU I2C access on AMD Tonga/Amethyst.
  • Added options to choose which type of values (current, mix, max, average) to show in tray, LG LCD and RTSS.
  • Enhanced sensor monitoring on ASUS Z170-PREMIUM.
  • Added support of IRF IR35201.
  • Added monitoring of page file usage.
  • Added support of Corsair H80i v2, H100i v2 and H115i.
  • Improved monitoring of WHEA errors.

What's New in version 5.13.2765 Beta

  • Fixed monitoring of total/NAND reads/writes for some SanDisk drives
  • Extended NVMe S.M.A.R.T. status and fixed total writes amount
  • Fixed reporting of sub-zero temperatures on NVIDIA GPUs
  • Added support of Samsung SSD 950 Pro using the default Microsoft NVMe driver
  • Added preliminary support of AMD Ellesmere, Baffin, Greenland
  • Fixed GPU I2C access on AMD Tonga/Amethyst
  • Added options to choose which type of values (current, mix, max, average) to show in tray, LG LCD and RTSS
  • Enhanced sensor monitoring on ASUS Z170-PREMIUM